Grant and Stone:Builders Merchants, Plumbers Merchants, Decorators Merchants and Electrical Wholesalers
Grant and Stone: Call 01628 784 950 to check stock

View Cart | Checkout
Items Ordered: , Cart Value:

Heat Mat 7mm in screed heating cable

Grant and Stone |  Electrical Supplies |  Heat Mat Underfloor Central Heating |  Heat Mat 7mm in screed heating cable

Heatmat 210w 7mm In-Screed Heating Cable

Heatmat 210w 7mm In-Screed Heating Cable
Product Code:PKC-7.0-0210


Internet Price : £46.00 (£55.20 Inc VAT at 20%)


Quantity:  



  • Heat mat in-screed heating cable
  • Heatmat product code: PKC-7.0-0210
  • 7mm thick heating cable is designed for new build applications or any other circumstances where screed is going to be laid. It is a cost effective alternative to conventional heating systems, and can be used under any floor covering.
  • It is normally fitted wither to a reinforcement mesh or by the use of the Heat Fix metal bands.
  • This system is usally installed on top of a layer of insulation beneath a 65mm screed and the output can be varied when being installed to accommodate your specific circumstancs.
  • If an output of 160W/m2 is chosed then any floor covering can be laid on top of the screed making this a suitable system to install when final floor coverings have not been applied.
  • This system is also suitable for use outdoors in frost protection and snow melting applications when used with the appropriate thermostat. In these circumstances an output of 270W is recommended.
  • The cable is CE marked and is guaranteed by a 15 year manufactures warranty. This system is manufactured in a BEAB approved factory.
  • The cable is a twin-conductor, one resistance wire and one return wire, insulated with silicon rubber and has a tinned copper metal shield. The cable is protected from stretching by a Fibreglass wire.
  • All cables have an output of 20W/m
  • 7mm cable compatible with: Thermal tilebacker board, thermostats, cable safe and levelling compount
  • Length in metres: 10.5
  • Coverage at 270W/m2 c-c 7.5cm: 0.82
  • Coverage at 200W/m2c-c 10.0cm:1.12
  • Coverage at 160W/m2c-c 12.5cm :1.32
  • Coverage at 130W/m2c-c 15.0cm :1.62
  • Coverage at 100W/m2c-c 20.02
  • Wattage: 210


Delivery on this item is: £4.99*...read more

Heatmat 417w 7mm In-Screed Heating Cable

Heatmat 417w 7mm In-Screed Heating Cable
Product Code:PKC-7.0-0417


Internet Price : £68.00 (£81.60 Inc VAT at 20%)


Quantity:  



  • Heat mat in-screed heating cable
  • Heatmat product code: PKC-7.0-0417
  • 7mm thick heating cable is designed for new build applications or any other circumstances where screed is going to be laid. It is a cost effective alternative to conventional heating systems, and can be used under any floor covering.
  • It is normally fitted wither to a reinforcement mesh or by the use of the Heat Fix metal bands.
  • This system is usally installed on top of a layer of insulation beneath a 65mm screed and the output can be varied when being installed to accommodate your specific circumstancs.
  • If an output of 160W/m2 is chosed then any floor covering can be laid on top of the screed making this a suitable system to install when final floor coverings have not been applied.
  • This system is also suitable for use outdoors in frost protection and snow melting applications when used with the appropriate thermostat. In these circumstances an output of 270W is recommended.
  • The cable is CE marked and is guaranteed by a 15 year manufactures warranty. This system is manufactured in a BEAB approved factory.
  • The cable is a twin-conductor, one resistance wire and one return wire, insulated with silicon rubber and has a tinned copper metal shield. The cable is protected from stretching by a Fibreglass wire.
  • All cables have an output of 20W/m
  • 7mm cable compatible with: Thermal tilebacker board, thermostats, cable safe and levelling compount
  • Length in metres: 21.0
  • Coverage at 270W/m2 c-c 7.5cm: 1.62
  • Coverage at 200W/m2c-c 10.0cm: 2.12
  • Coverage at 160W/m2c-c 12.5cm :2.62
  • Coverage at 130W/m2c-c 15.0cm :3.22
  • Coverage at 100W/m2c-c 20.0cm: 4.22
  • Wattage: 417


Delivery on this item is: £4.99*...read more

Heatmat 504w 7mm In-Screed Heating Cable

Heatmat 504w 7mm In-Screed Heating Cable
Product Code:PKC-7.0-0504


Internet Price : £74.00 (£88.80 Inc VAT at 20%)


Quantity:  



  • Heat mat in-screed heating cable
  • Heatmat product code: PKC-7.0-0504
  • 7mm thick heating cable is designed for new build applications or any other circumstances where screed is going to be laid. It is a cost effective alternative to conventional heating systems, and can be used under any floor covering.
  • It is normally fitted wither to a reinforcement mesh or by the use of the Heat Fix metal bands.
  • This system is usally installed on top of a layer of insulation beneath a 65mm screed and the output can be varied when being installed to accommodate your specific circumstancs.
  • If an output of 160W/m2 is chosed then any floor covering can be laid on top of the screed making this a suitable system to install when final floor coverings have not been applied.
  • This system is also suitable for use outdoors in frost protection and snow melting applications when used with the appropriate thermostat. In these circumstances an output of 270W is recommended.
  • The cable is CE marked and is guaranteed by a 15 year manufactures warranty. This system is manufactured in a BEAB approved factory.
  • The cable is a twin-conductor, one resistance wire and one return wire, insulated with silicon rubber and has a tinned copper metal shield. The cable is protected from stretching by a Fibreglass wire.
  • All cables have an output of 20W/m
  • 7mm cable compatible with: Thermal tilebacker board, thermostats, cable safe and levelling compount
  • Length in metres: 26.0
  • Coverage at 270W/m2 c-c 7.5cm: 1.72
  • Coverage at 200W/m2c-c 10.0cm: 2.52
  • Coverage at 160W/m2c-c 12.5cm :3.22
  • Coverage at 130W/m2c-c 15.0cm :3.92
  • Coverage at 100W/m2c-c 20.0cm: 5.02
  • Wattage: 509


Delivery on this item is: £4.99*...read more

Heatmat 627w 7mm In-Screed Heating Cable

Heatmat 627w 7mm In-Screed Heating Cable
Product Code:PKC-7.0-0627


Internet Price : £89.00 (£106.80 Inc VAT at 20%)


Quantity:  



  • Heat mat in-screed heating cable
  • Heatmat product code: PKC-7.0-0627
  • 7mm thick heating cable is designed for new build applications or any other circumstances where screed is going to be laid. It is a cost effective alternative to conventional heating systems, and can be used under any floor covering.
  • It is normally fitted wither to a reinforcement mesh or by the use of the Heat Fix metal bands.
  • This system is usally installed on top of a layer of insulation beneath a 65mm screed and the output can be varied when being installed to accommodate your specific circumstancs.
  • If an output of 160W/m2 is chosed then any floor covering can be laid on top of the screed making this a suitable system to install when final floor coverings have not been applied.
  • This system is also suitable for use outdoors in frost protection and snow melting applications when used with the appropriate thermostat. In these circumstances an output of 270W is recommended.
  • The cable is CE marked and is guaranteed by a 15 year manufactures warranty. This system is manufactured in a BEAB approved factory.
  • The cable is a twin-conductor, one resistance wire and one return wire, insulated with silicon rubber and has a tinned copper metal shield. The cable is protected from stretching by a Fibreglass wire.
  • All cables have an output of 20W/m
  • 7mm cable compatible with: Thermal tilebacker board, thermostats, cable safe and levelling compount
  • Length in metres: 32.0
  • Coverage at 270W/m2 c-c 7.5cm: 2.42
  • Coverage at 200W/m2c-c 10.0cm: 3.3sup>2
  • Coverage at 160W/m2c-c 12.5cm :4.02
  • Coverage at 130W/m2c-c 15.0cm :4.82
  • Coverage at 100W/m2c-c 20.0cm: 6.42
  • Wattage: 627


Delivery on this item is: £4.99*...read more

Heatmat 837w 7mm In-Screed Heating Cable

Heatmat 837w 7mm In-Screed Heating Cable
Product Code:PKC-7.0-0837


Internet Price : £104.00 (£124.80 Inc VAT at 20%)


Quantity:  



  • Heat mat in-screed heating cable
  • Heatmat product code: PKC-7.0-0837
  • 7mm thick heating cable is designed for new build applications or any other circumstances where screed is going to be laid. It is a cost effective alternative to conventional heating systems, and can be used under any floor covering.
  • It is normally fitted wither to a reinforcement mesh or by the use of the Heat Fix metal bands.
  • This system is usally installed on top of a layer of insulation beneath a 65mm screed and the output can be varied when being installed to accommodate your specific circumstancs.
  • If an output of 160W/m2 is chosed then any floor covering can be laid on top of the screed making this a suitable system to install when final floor coverings have not been applied.
  • This system is also suitable for use outdoors in frost protection and snow melting applications when used with the appropriate thermostat. In these circumstances an output of 270W is recommended.
  • The cable is CE marked and is guaranteed by a 15 year manufactures warranty. This system is manufactured in a BEAB approved factory.
  • The cable is a twin-conductor, one resistance wire and one return wire, insulated with silicon rubber and has a tinned copper metal shield. The cable is protected from stretching by a Fibreglass wire.
  • All cables have an output of 20W/m
  • 7mm cable compatible with: Thermal tilebacker board, thermostats, cable safe and levelling compount
  • Length in metres: 42.0
  • Coverage at 270W/m2 c-c 7.5cm: 3.22
  • Coverage at 200W/m2c-c 10.0cm: 4.2sup>2
  • Coverage at 160W/m2c-c 12.5cm :5.32
  • Coverage at 130W/m2c-c 15.0cm :6.32
  • Coverage at 100W/m2c-c 20.0cm: 8.42
  • Wattage: 837


Delivery on this item is: £4.99*...read more

Heatmat 1022w 7mm In-Screed Heating Cable

Heatmat 1022w 7mm In-Screed Heating Cable
Product Code:PKC-7.0-1022


Internet Price : £120.00 (£144.00 Inc VAT at 20%)


Quantity:  



  • Heat mat in-screed heating cable
  • Heatmat product code: PKC-7.0-1022
  • 7mm thick heating cable is designed for new build applications or any other circumstances where screed is going to be laid. It is a cost effective alternative to conventional heating systems, and can be used under any floor covering.
  • It is normally fitted wither to a reinforcement mesh or by the use of the Heat Fix metal bands.
  • This system is usally installed on top of a layer of insulation beneath a 65mm screed and the output can be varied when being installed to accommodate your specific circumstancs.
  • If an output of 160W/m2 is chosed then any floor covering can be laid on top of the screed making this a suitable system to install when final floor coverings have not been applied.
  • This system is also suitable for use outdoors in frost protection and snow melting applications when used with the appropriate thermostat. In these circumstances an output of 270W is recommended.
  • The cable is CE marked and is guaranteed by a 15 year manufactures warranty. This system is manufactured in a BEAB approved factory.
  • The cable is a twin-conductor, one resistance wire and one return wire, insulated with silicon rubber and has a tinned copper metal shield. The cable is protected from stretching by a Fibreglass wire.
  • All cables have an output of 20W/m
  • 7mm cable compatible with: Thermal tilebacker board, thermostats, cable safe and levelling compount
  • Length in metres: 50.0
  • Coverage at 270W/m2 c-c 7.5cm: 3.52
  • Coverage at 200W/m2c-c 10.0cm: 5.0sup>2
  • Coverage at 160W/m2c-c 12.5cm 6.32
  • Coverage at 130W/m2c-c 15.0cm :7.52
  • Coverage at 100W/m2c-c 20.0cm: 10.02
  • Wattage: 1022


Delivery on this item is: £4.99*...read more

Heatmat 1246w 7mm In-Screed Heating Cable

Heatmat 1246w 7mm In-Screed Heating Cable
Product Code:PKC-7.0-1246


Internet Price : £142.00 (£170.40 Inc VAT at 20%)


Quantity:  



  • Heat mat in-screed heating cable
  • Heatmat product code: PKC-7.0-1246
  • 7mm thick heating cable is designed for new build applications or any other circumstances where screed is going to be laid. It is a cost effective alternative to conventional heating systems, and can be used under any floor covering.
  • It is normally fitted wither to a reinforcement mesh or by the use of the Heat Fix metal bands.
  • This system is usally installed on top of a layer of insulation beneath a 65mm screed and the output can be varied when being installed to accommodate your specific circumstancs.
  • If an output of 160W/m2 is chosed then any floor covering can be laid on top of the screed making this a suitable system to install when final floor coverings have not been applied.
  • This system is also suitable for use outdoors in frost protection and snow melting applications when used with the appropriate thermostat. In these circumstances an output of 270W is recommended.
  • The cable is CE marked and is guaranteed by a 15 year manufactures warranty. This system is manufactured in a BEAB approved factory.
  • The cable is a twin-conductor, one resistance wire and one return wire, insulated with silicon rubber and has a tinned copper metal shield. The cable is protected from stretching by a Fibreglass wire.
  • All cables have an output of 20W/m
  • 7mm cable compatible with: Thermal tilebacker board, thermostats, cable safe and levelling compount
  • Length in metres: 62.0
  • Coverage at 270W/m2 c-c 7.5cm: 4.72
  • Coverage at 200W/m2c-c 10.0cm: 6.2sup>2
  • Coverage at 160W/m2c-c 12.5cm 7.82
  • Coverage at 130W/m2c-c 15.0cm :9.32
  • Coverage at 100W/m2c-c 20.0cm: 12.42
  • Wattage: 1246


Delivery on this item is: £4.99*...read more

Heatmat 1381w 7mm In-Screed Heating Cable

Heatmat 1381w 7mm In-Screed Heating Cable
Product Code:PKC-7.0-1381


Internet Price : £152.00 (£182.40 Inc VAT at 20%)


Quantity:  



  • Heat mat in-screed heating cable
  • Heatmat product code: PKC-7.0-1381
  • 7mm thick heating cable is designed for new build applications or any other circumstances where screed is going to be laid. It is a cost effective alternative to conventional heating systems, and can be used under any floor covering.
  • It is normally fitted wither to a reinforcement mesh or by the use of the Heat Fix metal bands.
  • This system is usally installed on top of a layer of insulation beneath a 65mm screed and the output can be varied when being installed to accommodate your specific circumstancs.
  • If an output of 160W/m2 is chosed then any floor covering can be laid on top of the screed making this a suitable system to install when final floor coverings have not been applied.
  • This system is also suitable for use outdoors in frost protection and snow melting applications when used with the appropriate thermostat. In these circumstances an output of 270W is recommended.
  • The cable is CE marked and is guaranteed by a 15 year manufactures warranty. This system is manufactured in a BEAB approved factory.
  • The cable is a twin-conductor, one resistance wire and one return wire, insulated with silicon rubber and has a tinned copper metal shield. The cable is protected from stretching by a Fibreglass wire.
  • All cables have an output of 20W/m
  • 7mm cable compatible with: Thermal tilebacker board, thermostats, cable safe and levelling compount
  • Length in metres: 69.0
  • Coverage at 270W/m2 c-c 7.5cm: 5.22
  • Coverage at 200W/m2c-c 10.0cm: 6.9sup>2
  • Coverage at 160W/m2c-c 12.5cm 9.22
  • Coverage at 130W/m2c-c 15.0cm :10.42
  • Coverage at 100W/m2c-c 20.0cm: 13.82
  • Wattage: 1381


Delivery on this item is: £4.99*...read more

Heatmat 1774w 7mm In-Screed Heating Cable

Heatmat 1774w 7mm In-Screed Heating Cable
Product Code:PKC-7.0-1774


Internet Price : £177.00 (£212.40 Inc VAT at 20%)


Quantity:  



  • Heat mat in-screed heating cable
  • Heatmat product code: PKC-7.0-1774
  • 7mm thick heating cable is designed for new build applications or any other circumstances where screed is going to be laid. It is a cost effective alternative to conventional heating systems, and can be used under any floor covering.
  • It is normally fitted wither to a reinforcement mesh or by the use of the Heat Fix metal bands.
  • This system is usally installed on top of a layer of insulation beneath a 65mm screed and the output can be varied when being installed to accommodate your specific circumstancs.
  • If an output of 160W/m2 is chosed then any floor covering can be laid on top of the screed making this a suitable system to install when final floor coverings have not been applied.
  • This system is also suitable for use outdoors in frost protection and snow melting applications when used with the appropriate thermostat. In these circumstances an output of 270W is recommended.
  • The cable is CE marked and is guaranteed by a 15 year manufactures warranty. This system is manufactured in a BEAB approved factory.
  • The cable is a twin-conductor, one resistance wire and one return wire, insulated with silicon rubber and has a tinned copper metal shield. The cable is protected from stretching by a Fibreglass wire.
  • All cables have an output of 20W/m
  • 7mm cable compatible with: Thermal tilebacker board, thermostats, cable safe and levelling compount
  • Length in metres: 89.0
  • Coverage at 270W/m2 c-c 7.5cm: 6.72
  • Coverage at 200W/m2c-c 10.0cm: 8.9sup>2
  • Coverage at 160W/m2c-c 12.5cm 11.12
  • Coverage at 130W/m2c-c 15.0cm :13.42
  • Coverage at 100W/m2c-c 20.0cm: 17.82
  • Wattage: 1774


Delivery on this item is: £4.99*...read more

Heatmat 2144w 7mm In-Screed Heating Cable

Heatmat 2144w 7mm In-Screed Heating Cable
Product Code:PKC-7.0-2144


Internet Price : £199.00 (£238.80 Inc VAT at 20%)


Quantity:  



  • Heat mat in-screed heating cable
  • Heatmat product code: PKC-7.0-2144
  • 7mm thick heating cable is designed for new build applications or any other circumstances where screed is going to be laid. It is a cost effective alternative to conventional heating systems, and can be used under any floor covering.
  • It is normally fitted wither to a reinforcement mesh or by the use of the Heat Fix metal bands.
  • This system is usally installed on top of a layer of insulation beneath a 65mm screed and the output can be varied when being installed to accommodate your specific circumstancs.
  • If an output of 160W/m2 is chosed then any floor covering can be laid on top of the screed making this a suitable system to install when final floor coverings have not been applied.
  • This system is also suitable for use outdoors in frost protection and snow melting applications when used with the appropriate thermostat. In these circumstances an output of 270W is recommended.
  • The cable is CE marked and is guaranteed by a 15 year manufactures warranty. This system is manufactured in a BEAB approved factory.
  • The cable is a twin-conductor, one resistance wire and one return wire, insulated with silicon rubber and has a tinned copper metal shield. The cable is protected from stretching by a Fibreglass wire.
  • All cables have an output of 20W/m
  • 7mm cable compatible with: Thermal tilebacker board, thermostats, cable safe and levelling compount
  • Length in metres: 105.0
  • Coverage at 270W/m2 c-c 7.5cm: 7.92
  • Coverage at 200W/m2c-c 10.0cm: 10.5sup>2
  • Coverage at 160W/m2c-c 12.5cm 13.12
  • Coverage at 130W/m2c-c 15.0cm :15.82
  • Coverage at 100W/m2c-c 20.0cm: 21.02
  • Wattage: 2144


Delivery on this item is: £4.99*...read more

Heatmat 2458w 7mm In-Screed Heating Cable

Heatmat 2458w 7mm In-Screed Heating Cable
Product Code:PKC-7.0-2458


Internet Price : £215.00 (£258.00 Inc VAT at 20%)


Quantity:  



  • Heat mat in-screed heating cable
  • Heatmat product code: PKC-7.0-2458
  • 7mm thick heating cable is designed for new build applications or any other circumstances where screed is going to be laid. It is a cost effective alternative to conventional heating systems, and can be used under any floor covering.
  • It is normally fitted wither to a reinforcement mesh or by the use of the Heat Fix metal bands.
  • This system is usally installed on top of a layer of insulation beneath a 65mm screed and the output can be varied when being installed to accommodate your specific circumstancs.
  • If an output of 160W/m2 is chosed then any floor covering can be laid on top of the screed making this a suitable system to install when final floor coverings have not been applied.
  • This system is also suitable for use outdoors in frost protection and snow melting applications when used with the appropriate thermostat. In these circumstances an output of 270W is recommended.
  • The cable is CE marked and is guaranteed by a 15 year manufactures warranty. This system is manufactured in a BEAB approved factory.
  • The cable is a twin-conductor, one resistance wire and one return wire, insulated with silicon rubber and has a tinned copper metal shield. The cable is protected from stretching by a Fibreglass wire.
  • All cables have an output of 20W/m
  • 7mm cable compatible with: Thermal tilebacker board, thermostats, cable safe and levelling compount
  • Length in metres: 123.0
  • Coverage at 270W/m2 c-c 7.5cm: 9.22
  • Coverage at 200W/m2c-c 10.0cm: 12.3sup>2
  • Coverage at 160W/m2c-c 12.5cm 15.42
  • Coverage at 130W/m2c-c 15.0cm :18.52
  • Coverage at 100W/m2c-c 20.0cm: 24.62
  • Wattage: 2458


Delivery on this item is: £4.99*...read more

Heatmat 3067w 7mm In-Screed Heating Cable

Heatmat 3067w 7mm In-Screed Heating Cable
Product Code:PKC-7.0-3067


Internet Price : £262.00 (£314.40 Inc VAT at 20%)


Quantity:  



  • Heat mat in-screed heating cable
  • Heatmat product code: PKC-7.0-3067
  • 7mm thick heating cable is designed for new build applications or any other circumstances where screed is going to be laid. It is a cost effective alternative to conventional heating systems, and can be used under any floor covering.
  • It is normally fitted wither to a reinforcement mesh or by the use of the Heat Fix metal bands.
  • This system is usally installed on top of a layer of insulation beneath a 65mm screed and the output can be varied when being installed to accommodate your specific circumstancs.
  • If an output of 160W/m2 is chosed then any floor covering can be laid on top of the screed making this a suitable system to install when final floor coverings have not been applied.
  • This system is also suitable for use outdoors in frost protection and snow melting applications when used with the appropriate thermostat. In these circumstances an output of 270W is recommended.
  • The cable is CE marked and is guaranteed by a 15 year manufactures warranty. This system is manufactured in a BEAB approved factory.
  • The cable is a twin-conductor, one resistance wire and one return wire, insulated with silicon rubber and has a tinned copper metal shield. The cable is protected from stretching by a Fibreglass wire.
  • All cables have an output of 20W/m
  • 7mm cable compatible with: Thermal tilebacker board, thermostats, cable safe and levelling compount
  • Length in metres: 150.0
  • Coverage at 270W/m2 c-c 7.5cm: 11.32
  • Coverage at 200W/m2c-c 10.0cm: 15.0sup>2
  • Coverage at 160W/m2c-c 12.5cm 18.82
  • Coverage at 130W/m2c-c 15.0cm :22.52
  • Coverage at 100W/m2c-c 20.0cm: 30.02
  • Wattage: 3067


Delivery on this item is: £4.99*...read more

Grant and Stone |  Electrical Supplies |  Heat Mat Underfloor Central Heating |  Heat Mat 7mm in screed heating cable

spacer

Section Directory

Shower Pumps

Aqualisa Showers

Heating Supplies

Bristan Taps

Dimplex Heaters

Secured by Sagepay, All major credit and debit cards accepted

SiteMap | © 2011 Grant and Stone, Website Sales, Unit 3, Furze Platt Business Centre , Maidenhead, SL6 7PR | Tel: 01628 784950 | Fax: 01628 784951 | Contact a local branch
spacer